линия массив спикера
Двойной 10-дюймовый трехполосный громкоговоритель с точечным источником и вращающимся рупором
Предмет №: V-7
Components 2 x 10"/8"/1.4"
Dispersion 75° x 40°
SPLmax 140 dB
Weight 33 kg / 75 lb
Dispersion 75° x 40°
SPLmax 140 dB
Weight 33 kg / 75 lb
ОПИСАНИЕ
|
High Performance point sources loudspeaker
|
|
|
Max. sound pressure
|
140 dB
|
|
Frequency response (-5 dB standard)
|
59 Hz - 18 kHz
|
|
Frequency response (-5 dB CUT mode)
|
100 Hz - 18 kHz
|
|
Nominal impedance
|
8 Ω
|
|
Power handling capacity (RMS/peak 10 ms)
|
500/2000 W
|
|
Nominal dispersion angle (h x v)
|
75° x 40°
|
|
Components
|
2 x 10" LF driver with neodymium magnet
|
|
1 x 8" MF driver with neodymium magnet
|
|
|
1 x 1.4” exit compression driver
|
|
|
Connections
|
2 x NLT4 F/M
|
|
optional 2 x NL4 M
|
|
|
Dimensions (h x w x d)
|
700 x 308 x 466 mm
27.5 x 12 x 18.3" |
|
Weight
|
33 kg/75 lb
|
| Feature |
| Horn can be rotated by 90° |
| High-sensitivity MF horn + reflex ports |
| Symmetrical layout, balanced dispersion |
| Russia-plywood, polyurea coat |
| M10 threaded inserts for stack or fly. |
| Highest SPL at lowest distortion |
 |
The top and bottom panels incorporate a handle each.
Two M10 threaded inserts on the top and bottom panels each to accept either the Mounting bracket/Flying adapter/ Horizontal bracket. |
| The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. |  |
 |
The connection panel on the back shall be recessed and fitted with speakon NL4 sockets
|
| The cabinets are constructed from marine plywood and have an impact and weather protected PCP (Polyurea Cabinet Protection) finish. |  |
Speaker Components
 |
 |
| 2 x 10" LF drivers |
| Extended LF performance from large cabinet volume and port design |
| 1 x horn loaded 8" MF driver |
| Extended MF performance from high sensitivity mid range horn |
| 1x1.4" HF Horn |
| 1 x 1.4" exit HF driver on a rotatable CD horn. By factory default, the HF horn is fitted to the cabinet providing the nominal horizontal dispersion when the cabinet is used in upright position. This is indicated by a white label on the horn flange. The label is visible through the front grill on each side of the cabinet as shown in the graphic opposite. |
| The HF horn can be rotated through 90°. |
Mounting examples
